Need Help? Call 1-888-924-7278 (Mon-Fri 7am-5pm MST) Se habla espanol

Cove Base - 2.5" White Roll


Cove Base - 2.5" White Roll CVBR25W
Cove Base - 2.5" White Roll CVBR25W

2-1/2" White - 120' Roll Box

Your Price Login to see price
  • Co-extruded top layer resists scuffs and scratches.
  • Will not fade, crack, or chip.
  • Inexpensive because it is made from PVC vinyl.
  • Ribbed back for positive adhesion.
  • Top-lip design helps base fit tightly against wall.

  • Installation:
    1. Required materials: Sharp utility knife, a hand roller, an 1/8" (3.175mm) notched trowel or wall base cartridge gun, and the wall base adhesive.
    2. The adhesive, base, and room temperature should be at least 65 degrees F during application and for at least 24 hours before and after the application. If you are installing vinyl roll base, it should lie flat for 24 hours before application.
    3. IMPORTANT: Wall base CANNOT be used over vinyl wall covering. If needed to install on a wall with vinyl wall covering, you must cut the wall covering and expose the wall surface. Cut the wall covering leaving a 1/4" margin below where the top of the base will be.
    4. Make sure that the wall surface is clean, dry, and free of dust, dirt, and loose paint. Watch for dusty plaster walls or old adhesives. Plaster walls must be structurally sound and smooth. Drywall seaming compound must be smooth.
    5. The gap between the floor and the wall should be no more than 1/4".
    6. Spread the adhesive onto the back of the base with an 1/8" notched trowel. Leave a 1/4" space at the top of the base when spreading the adhesive. A wall base cartridge gun with the pEstate tip can be used.
    7. Press the base into place immediately after applying the adhesive. The adhesive MUST NOT "skin over." Use a hand roller to press the base and adhesive to the wall. Roll the base toward the last installed piece. This will avoid “shrinkage” problems and gaps between sections.
    8. Butt ends firmly together so that the top of the base fits tightly against the wall.

    REMEMBER: NEVER, NEVER stretch the wall base during installation.
    • ColorWhite
    • Size2.5"
    • Additional Shipping Charges May Apply
    • MPNC25C54P170

    People Who Bought This Also Bought

    Customer Reviews

    Write a Review



    You’ll be 100% happy or we'll make it right.


    Most orders delivered within one business day.


    Thousands of items always in stock.


    Over 30 years of personal service. Se Hable Espanol.


    Your maintenance, repair & operations business partner.

    Order with confidence
        AZ Partsmaster BBB Business Review
    AZ Partsmaster website is not an offer to sell product to residents of the state of California, nor do we deliver to addresses within California.

    © Copyright, 2019 AZ Partsmaster | Site Map
    Web design by Develisys
    Please Wait...
    Please wait, loading the cart and allocating stock